Banner Image

Exploren Tariffs

Welcome To Exploren
Exploren provides a wide variety of tariff structures, allowing you to provide the best possible value for your charging customers
This page provides a comprehensive guide to the ways you can configure tariffs through the Exploren platform.

Duration plus energy

The most common type of tariff used by Exploren customers.

Cost of a charging session is determined by a connection fee, energy fee, duration fee and idle fee.

Connection fee
A fixed fee that is applied at the start of the charging session, e.g. $0.40
Connection fee minimum session duration (minutes)

Any sessions less than this duration will not incur a connection fee, e.g. 2 minutes

Connection fee minimum session energy (kWh)

Any sessions that consume less than this amount of energy will not incur a connection fee, e.g. 0.5kWh

Energy fee – price per kWh

A fee based on the amount of power consumed by the user, e.g. $0.33

Duration fee time-period

Determines the interval  at which the Duration fee applies, options: [1min, 15min, 30min, 60min, 240min, 360min]

Fee per time-period

Determines the fee per specified period. e.g. $0.45

If a user were to charge for an hour with a Duration fee time-period of 15min and a Fee per time-period of $0.45 would result in the user being charged a $1.80 duration fee.

Duration fee grace period

Grace period before the Duration fee begins to count, e.g. 15min

Idle fee per minute

A fee charged per minute whenever the vehicle is connected to the charge point but not drawing any power, e.g. $0.50

Idle fee grace period

Grace period before the Idle fee begins to count, e.g. 15min

Pre-authorize amount

Amount that is blocked on the user’s card when a session begins and is refunded later. Default 10min

Min price

Minimum total  fee per session.

Can be described like this:

Duration + energy

Connection fee: $0.40, (minimum 2 minutes, 0.5kWh)

Energy fee: $0.33 per kWh

Duration fee: $0.45 per 30min (15min grace period)

Idle fee: $0.25 per minute (15minute grace period

Pre-authorize amount: $10

Minimum price: $4.00


Duration plus energy – Time of Day

Similar to Duration + energy, but with the ability to configure different energy, duration and idle fees for night and day periods.

Day tariff start

Start of the time period where the “day” fees are applied, in 24hr time, e.g. 07:00

Night tariff start

Start of the time period where the “night” fees are applied, in 24hr time, e.g. 18:00

Can be described like this:

Duration + energy Time of Day

Day start: 07:00

Night start: 18:00

Connection fee: $0.40, (minimum 2 minutes, 0.5kWh)

Energy fee:  $0.33 (day)$0.20 (night)

Duration fee: $0.45 (day), $0.30(night) per 30min (15min grace period)

Idle fee: $0.25 (day)$0.15(night) per minute (15minute grace period)

Pre-authorize amount: $10

Minimum price: $4.00


Energy – Time of use

Allows per-kWh pricing based on a configured electricity rate across a day.

Electricity rate

Define cost of electricity using blocks of either 15 minutes, 30 minutes or an hour. Can include different configured costs for different days of the week.

Please send an email to hello@exploren.com.au for assistance in setting up an electricity rate for your chargers.

Markup – % per kWh

Percentage markup to charge above the configured electricity cost.

Markup – fixed fee per kWh

Fixed fee to add on to the configured electricity cost.

Flexible markup – fixed fee per kWh

Configure different fixed fee markup for each period of the day.


Per unit billing

Allows per-kWh and per-time-unit billing, where different rates can be configured for different charging quantities and times.

For example – the energy fee can be set to $0.30 per kWh for the first 10kWh, then $0.45 per kWh until 20kWh is charged, and then $0.60 per kWh for all power drawn after that.

Similarly, the duration and idle fees can be set to $0.35 per hour for the first 2 hours, then $0.70 per hour until the session reaches 4 hours, and then $1.00 per hour for all charging time after that.

Can be described like this:

Standard – Per unit billing

Energy fee 

 0kWh to 10kWh, $0.30 per kWh

 10kWh to 20kWh, $0.45 per kWh

> 20kWh, $0.60 per kWh

Duration fee

 0 to 2 hours, $0.35 per hour

 2 to 4 hours, $0.70 per hour

>4 hours, $1.00 per hour

Idle fee

 0 to 1 hours, $0.70 per hour

 1 to 2 hours, $1.40 per hour

>2 hours, $5.00 per hour

Pre-authorize amount: $10

Minimum price: $4.00


Time of day billing

Allows per-kWh and per-time-unit billing, where different rates can be configured for different periods of the day.

Can be described like this:

Standard – Time of day billing

[7:00 to 14:00]

Connection fee: $0.40, (minimum 2 minutes, 0.5kWh)

Energy fee: $0.33 per kWh

Duration fee: $0.45 per 30min (15min grace period)

Idle fee: $0.25 per minute (15minute grace period)

[14:00 to 07:00]

Connection fee: $0.40, (minimum 2 minutes, 0.5kWh)

Energy fee: $0.25 per kWh

Duration fee: $0.10 per 30min (15min grace period)

Idle fee: $0.25 per minute (15minute grace period)


Pre-authorize amount: $10

Minimum price: $4.00