Banner Image

Delta Charger Set-up

This is a brief guide to pointing a Delta Electronics charger to the Exploren OCPP platform.

This guide was designed for the Delta AC MAX.

For more information on completing your charger on-boarding, check out the Delta website.

Accessing the charger

In order to connect your charger to Exploren, you will need to establish a connection with the charger over Wi-Fi or Ethernet, and log in to the Web Configuration Tool.

Access the Web Configuration Tool as shown in the charger Installation Guide.

  • The Wi-Fi SSID is typically the same as the serial number printed on the charger.
  • Wi-Fi credentials are typically printed on the charger.
  • The Web Configuration Tool can be accessed at for a Wi-Fi connection, and for an Ethernet connection.

Configuring the charger

Once you have access to the Web Configuration Tool, navigate to the Configuration tab.

Make sure Operating with OCPP Central System is selected, then note the following:

Location of sticker on charger
Web Configuration Tool

Final steps

Once the charger is configured, let us know at so we can confirm the connection is established.